ENG Receivers

RX900 ENG Receiver

RX900M / RX900S ENG Receiver

The RX900M (mono) and RX900S (stereo) are Digital ENG Receivers.  They can have low power consumption and can be powered either internally with four AA Lithium batteries or externally with a 9 to 18 VDC power supply.

The RX900M can only be used with mono transmitters, the RX900S can be used with either mono or stereo transmitters.

 

RX900M Specifications:

Receiver Audio
Receiver Type: True Diversity Single Conversion Digital Demodulator
RF Modulation: Proprietary Digital Method
RF Frequency Range: 518.0 to 872.0 MHz (Typical Blocks are 36 MHz wide)
RF Frequency Step: 100 KHz

RX900S Rear View

RX900S Rear View - 5-Pin XLR Out

RF Bandwidth: US Mode: 200 KHz / EU Mode: 125 KHz
Channel Separation: 500 KHz (700 KHz recommended)
Sensitivity: -100 dBm
Antenna Connector: 50-ohm SSMA Female

Receiver Audio
Dynamic Range: 114 dB
Distortion: 0.001%
DAC Bit-Depth: 24 Bits
DAC Rate: 48 kHz
RX900M Audio Output Connector: XLR-3M (Mono)
RX900S Audio Output Connector: XLR-5M (Stereo)
Mic Audio Output Level: -40 dBm
Line Audio Output Level: -6 dBm

Physical

RX900M Rear View

RX900M Rear View - 3-Pin XLR Out

Weight:   4.0 oz (113 grams) with Battery
Dimensions:  1.25″ x 3.25″ x 5.25″ (32mm x 83mm x 133mm)
External Power:  9 to 18 VDC @ 200 mA (150 mA in Power Saver Mode)
Internal Power: Up to 4 Hours (4 AA) @ 470 mA (350 mA in Power Saver Mode)
Display: Graphic LCD Panel

All Specifications subject to change without notice