ERX Series Encrypted Digital IFB Receivers

ERX2TCD

ERX2TCD Front View

The brand new ERX2 & ERX2TCD Encrypted IFB bodypacks receive high quality digital audio, timecode and metadata from a Zaxcom IFB transmitter.  They have an LCD display for showing timecode and current Scene and Take metadata in realtime with a hold button for script supervisors.

These new second generation IFB receivers are made from a more durable nylon composite housing and have a collar around the volume knob to increase durability.  There are also holes for an optional belt clip.

The ERX2TCD has a built-in timecode reader/generator and output to continuously jam digital slates ensuring no timecode drift between Deva/Fusion and the slate.  The timecode will stay accurate even in the case of an extended RF dropout.  It will also communicate the Scene and Take metadata to ZaxNet compatible digital slates for display when the clapper is activated.

ERX2 rear view pictures with belt clip

ERX2 rear view pictures w/ optional belt clip

The ERX2TCD also has the ability to delay the received audio signal by up to 300ms or 10 video frames. This is used to provide a personal audio delay to match the viewing of your scene on different monitors or cameras that can have different video delays due to video signal processing. When used with ZaxNet the delay can be set differently between live recording and playback modes.

They both contain a 1 kHz notch filter to eliminate the transmission of tone that is sometimes sent from the mixing console.  The notch filter frequency is adjustable and using the notch filter won’t affect the quality of the IFB audio.

The ERX’s are compatible with ZaxNet or individually with the IFB100 2.4 GHz transmitter, the QIFB portion of the QRX100 receiver or the IFB transmitter built into the Nomad 6, 8 or 12.

ERX2  – receives audio and displays timecode
ERX2TCD  – outputs delay and timecode for red camera or digital slates

Bulk purchase policy
ERX2 / ERX2TCD cost less when purchased in quantities of 5 or more.

If you own an ERX1 or ERX1TCD and would like to upgrade, please contact the factory or your local dealer.

Specifications:

ERX2 Top View

ERX2 Top View

RF Frequency: 2.403 GHz to 2.475 GHz
RF Bandwidth: 1MHz
Frequency Spacing: 2MHz
System channels: 36

Timecode output: SMPTE
Timecode output level: .01VPP to 3VPP

Size: 4.1″ x 2.4″ x .6″
Weight: 3oz
Battery: 2 x alkaline AA
Battery life: approximately 12 hours
Audio output impedance: 16 ohm
Audio output level max: +10dB
Audio output format: 2 channel mono

All Specifications subject to change without notice.