IFB100

IFB100 Transmitter

IFB100 Transmitter

The IFB100 transmits IFB audio, timecode and remote control signals to the TRX900 series digital wireless transceivers on a single RF carrier using a 2.4 GHz signal.  It can be used license-free in almost every country.

The IFB100 can be used in an array of applications – on your sound cart, in a studio or on the side of your video camera.  The left side has dedicated connectors for:  two audio inputs, timecode in/out and power in.  The front has a graphic LCD screen indicating the transmitter status and timecode display.

IFB audio is accepted from a balanced audio connector at line-level.  The built-in 2-channel audio mixer can combine two separate channels of audio onto the mono digital transmission of the IFB100.

IFB100 Connector View

IFB100 Connector View

The timecode reader / generator runs at all common frame-rates and directly accepts SMPTE timecode from an external source.  It can continuously jam external timecode or free run.

As a timecode and remote control transmitter, the IFB100 is compatible with both the TRX series digital wireless and the ZFR100 flash recorder.  Settings such as body pack audio gain and RF frequency are adjustable – even while the transmitter is in use.

The IFB100 transmitter makes it easy to have a virtual multi-track recording.  It’s easily achieved by sending timecode to multiple TRX’s or ZFR’s at the same time – their recordings all have the same timecode that easily matches up in Post. (Pat Pend)

The RF power output is 100 mW.  IFB audio has a range of approximately 150 feet, timecode and remote control commands have a range of approximately 500 feet.

IFB100 Specifications:

IFB100 Top View

IFB100 Top View - Memory Card Slot for Updating Software

FB Transmitter
RF Power Output: 100 mW
RF Modulation: Digital Spread Spectrum
RF Frequency Range:  2.403 to 2.475 GHz
RF Frequency Step: 0.001 GHz (1 MHz)
RF Bandwidth:  1 MHz
Channel Separation: 2 MHz
Antenna Connector: 50-ohm SMA Female
Emission Designator: 180 KV2E
FCC Part: CFR Title 47, Part 18

IFB Audio Transmitter
Dynamic Range: 103 dB
Distortion: 0.01%
Frequency Response: 20 Hz to 12 kHz
Highpass Filter: Off or 30 to 220 Hz, Step: 10 (6 dB Per Octave)
System Group Delay: 10 ms

IFB100 Trim Pots

IFB100 - Trim Pots for Adjusting Audio Level

IFB Audio Input
Connector: TA-5M
Type:  Balanced
Level: -10 dBu tp +8 dBu
Impedance: 10 k Ω
ADC Bit-depth:  24 bits
ADC Sampling Rate: 48 kHz

Timecode Input
Connector: Stereo 1/8″ (3.5 mm)
Level Range:  1 to 5V, P-P
Impedance:  10 k Ω

Timecode Reader / Generator
Clock Accuracy: 1.54 PPM (1 frame out in 6 hours)
Timecode Type: SMPTE
Timecode Frame Rates: 23.98, 24, 25, 29.97NDF, 29.97DF, 30NDF, 30DF

Physical
Weight:   6.0 oz (170 grams)
Dimensions:  3.44″ x 3.88″ x .9″ (87 mm x 98 mm x 23 mm)
External Power:  8 to 18 VDC @ 125 mA
Internal Power: N/A
Display: Graphic LCD Panel

All Specifications subject to change without notice.