Digital Wireless - Receivers

The RX900M (mono) ENG Receiver is compatible with the TRX900, TRX900AA and all other mono Zaxcom Digital Wireless transmitters.  It has a low power consumption and can be powered either internally with four AA Lithium batteries or externally with a 9 to 18 VDC power supply.

The RX900S (stereo) ENG Receiver is compatible with the TRX900, TRX900AA, TRX992 and all other Zaxcom Digital Wireless transmitters.  It has a low power consumption and can be powered either internally with four AA Lithium batteries or externally with a 9 to 18 VDC power supply.

The RX4900 is a single rack unit containing four stereo receivers.  It has the capability of receiving eight channels of audio while used with stereo transmitters.  The RX4900 provides all necessary power and antenna distribution internally for each of its four receivers.  The antenna inputs of the RX4900 have a complimentary loop output so multiple RX4900's can be connected to a single antenna system.

RX900M | RX900S | RX4900

RX900M Specifications:

RX900M
 RX900M Rear
RX900M - Front
RX900M Rear

Receiver
Receiver Type True diversity single conversion digital demodulator
RF Modulation proprietary digital method
RF Frequency Range 518.0 to 872.0 MHz (blocks are 20 to 36 MHz wide)
RF Frequency Step 100 KHz
RF Bandwidth US Mode:    200 KHz
  Euro Mode: 125 KHz
Channel Separation 500 KHz (700 KHz recommended)
Sensitivity -110 dBm
Antenna Connector 50-ohm SSMA female

Receiver Audio
Dynamic Range 114 dB
Distortion 0.001%
DAC Bit-depth 24 bits
DAC Rate 48 kHz
Audio Output Connector XLR-3M (mono)
Audio Output Level Mic:   -40 dBm
  Line:  -6 dBm

Physical
Weight 4.0 oz (113 grams) with battery
Dimensions (H x W x D) 1.25" x 3.25" x 5.25" (32mm x 83mm x 133mm)
External Power 9 to 18 VDC @ 200 mA (150 mA in Power Saver mode)
Internal Power (Battery) up to 4 hours (four AA) @ 470 mA (350 mA in Power Saver mode)
Display Graphic LCD panel

All Specifications subject to change without notice