Digital Wireless - Stereo Wireless
Zaxcom's stereo wireless system transmits two channels of audio using only one transmitter and one receiver. Using one system costs less and draws less power, the lighter weight will keep your camera man happy too!
Stereo Wireless is now better then ever since the introduction of the new TRX series of wireless. You can take any TRX900 or TRX900AA and ad the Stereo Adaptor (STA100) and you instantly have stereo wireless.
The Zaxcom Stereo Adaptor plugs onto the side of a TRX900 / TRX900AA digital wireless transmitter or ZFR100 recorder transforming it into a 2-channel device.
Features:
2-Channel line level input- Time code input
- Time code / Audio output
- External power input
The Zaxcom Stereo Adaptor adds flexibility to your wireless by allowing a standard mono channel to become a bag to camera stereo link. It provides two balanced audio inputs eliminating ground loop problems often encountered when using wireless transmitters in sound bag configurations.
The dedicated time code input can be used to synchronize the internal time code generator of the TRX900 / ZFR100 or for auto-loading audio onto the memory card. In auto-load mode there is always an exact match of audio recorded on the TRX900 / ZFR100 and on the video camera.
The time code / audio output connector can be used as either an audio monitor for playback of audio/confidence monitoring or as a time code output to jam other devices. The function is software selectable.
The external power input allows the Stereo Adaptor and TRX900 / ZFR100 to be operated from a 12 volt external power source.
Specifications:
Audio input connector: TA5 Male Audio input level: -6 dBu to +8 dBu balanced Time code input connector: Unbalanced 3.5 mm jack Time code in: 1V to 4V PP Time code / Audio out connector: Unbalanced 3.5 mm jack Time code / Audio output: 3V PP into 30Ω Power input connector: Switchcraft L712 jack Power input range: 8V to 16V DC Dynamic Rage: 103 dB Size: 1” x 0.8” x 3” / 25 mm x 20 mm x 76 mm Weight: 2.0 oz